A&E DUNAMIS 2 KVA Inverter LED

A&E DUNAMIS 2 KVA Inverter LED

70,000.00

 

• Intelligent long backup time model

• Super powerful charger built-in

• Pure Sine Wave Output

• Wide input voltage and frequency windows

• Energy saving function with UPS green mode

• Short circuit and overload protection

• Cold start

• Intelligent battery management

• Compatible with generator set

 

Qty:
Compare
Category:

Description

This Inverter can power PC, TV, fan, 2 KVA A&E Inverter LCD electric driller, refrigerator, recorder, water machine, lighting, computer, switchboard, server and other home appliance and office equipment.

A&E Dunamis pure sine wave inverter is the latest model presented by A&E Integrated Services Limited.  The A&E Dunamis charger has achieved significant improvements on battery charging, AC transfer, etc. By adopting DIP (dual in-line package) switch, the A&E Dunamis pure sine wave inverter provides more smart options for users to customize the performance of the device.

Features of A&E Dunamis Pure Sine Wave Inverter, Charger
1. High overload ability of our A&E Dunamis charger is up to 300% rated power(20 sec.).
2. A&E Dunamis pure sine wave inverter adopts low quiescent current, and power saver mode to reduce power consumption to 10W(3s sensing cycle)/3W(30s sensing cycle) *. It can extract max. power from various batteries with different protections, and low voltage trip can be selected (9.5V/10V or 10V/10.5V).
3. Uses PFC(power factor correction) for charger, which has less power consumption than conventional units.
4. It has 15s delay before transfer when AC resumes, and overload protection when our A&E Dunamis pure sine wave inverter equips with generator.
5. 10ms typical transfer time between battery and AC, which guarantees power continuity of A&E Dunamis charger. Uses selectable input AC voltage (184-253V or 154-253V) for different kinds of loads.
6. Our A&E Dunamis charger allows start up and through power with depleted batteries. Its powerful charge rate up to 90Amp**.
7. It can offer 3-step intelligent battery charging, and equipped with 8 preset battery type selector for totally flat batteries.
8. LCD status display, battery/AC priority switch, USB communication port are available for our A&E Dunamis pure sine wave inverter, it also has 17 alarms/warnings for easier operation and trouble-shooting, and ability to switch the unit on/off. In addition, select/deselect power saver mode can be used too.
Note:*For 1KW one. **For some models

 

A&E Dunamis Series Inverter&Charger

Electrical Specvifications
Model  2KVA  4KVA 5KVA  7.5KVA
Inverter Output Continuous Output Power 2000W 3000W 4000W 6000W
Surge Rating(20s) 6000W 9000W 12000W 18000W
Capable of Starting Electric Motor 2HP 3HP 4HP 6HP
Output Waveform Pure Sine wave/Same as input(Bypass mode)
Nominal Efficiency >88%(Peak)
Line Mode Efficiency >95%
Power Factor 0.9-1.0
Nominal Output Voltage rms 100-110-120Vac / 220-230-240Vac
Output Voltage Regulation ±10% RMS
Output Frequency 50/60Hz ± 0.3Hz
Short Circuit Protection Yes, Current Limit Function (Fault after 1sec)
Typical transfer Time 10ms(Max)
THD < 10%
DC Input Nominal Input Voltage 12.0Vdc
( *2 for 24Vdc, *4 for 48Vdc)
Minimum Start Voltage 10.0Vdc
Low Battery Alarm 10.5Vdc / 11.0Vdc
Low Battery Trip 10.0Vdc / 10.5Vdc
High Voltage Alarm & Fault 16.0Vdc
High DC Input Recovery 15.5Vdc
Low Battery voltage recover 13.0Vdc
Idle Consumption-Search Mode < 25 W when Power Saver On
Charge Input Voltage Range Wide: 90~135VAC / 164~243VAC;
Narraw: 100~135VAC / 194~243VAC;
Output Voltage Depends on battery type
Charger Breaker Rating 10A 20A 20A 30A
Max Charge Rate 35A / 70-90A Max (Charger Current Control)
Over Charge Protection Shutdown 15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Charger curve(4 stage constant current)
4 step digital controlled progressive charge
Battery types ( *2 for 24Vdc, *4 for 48Vdc)
Battery type Fast Vdc Float Vdc
Gel U.S.A 14.0 13.7
A.G.M 1 14.1 13.4
A.G.M 2 14.6 13.7
Sealed Lead Acid 14.4 13.6
Gel Euro 14.4 13.8
Open Lead Acid 14.8 13.3
Calcium 15.1 13.6
De-sulphation 15.5 for 4hrs
Remote Control Yes. Optional
Bypass & Protection Input Voltage Waveform Sine wave (Grid or Generator)
Nominal Voltage 120Vac 230Vac
Low Voltage Trip 80V/90V±4% 184V/154V±4%
Low Voltage re engage 90V/100V±4% 194V/164V±4%
High Voltage Trip 140V±4% 253V±4%
High Voltage re engage 135V±4% 243V±4%
Max Input AC Voltage 150VAC 270VAC
Nominal Input Frequency 50Hz or 60Hz (Auto detect)
Low Freq Trip 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz
Low Freq re engage 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz
High Freq Trip 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz
High Freq re engage 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz
Output Short circuit protection Circuit breaker
Bypass breaker rating 20A 30A 30A 40A
Transfer switch rating 30amp for UL & TUV 40amp for UL
Max bypass current 30amp 40amp
Mechanical Specification Mounting Wall mount
Inverter Dimensions(L*W*H) 382*218*179mm 442*218*179mm 598*218*179mm
Inverter Weight 20KG 24KG 35KG 45KG
Shipping Dimensions(L*W*H) 580*315*300mm 740*315*300mm
Shipping Weight 22KG 26KG 37KG 47KG
Display Status LEDs / Status LEDs+LCD
Standard Warranty 1 Year

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

X